- 🍸 Professional Alcohol Still — Home copper still, suitable for beginners or professional, easy to use. The alcohol still kit adopts an open cooling method. The copper cooling tube has good thermal conductivity and has a larger contact area with the coolant. This makes the whiskey still have excellent cooling performance and increase the wine production speed.
- 🍸 Alcohol Still — All parts of the distillery kit are made of food-grade materials, lead-free, high temperature resistance, acid and alkali resistance. The fermenter barrel is specially thickened and supports a variety of heating methods: gas stove, induction cooker, electric ceramic stove, firewood, etc. The buckle on the lid and the silicone gasket make the alcohol distiller have a perfect seal.
- 🍸 Built-in Thermometer — The distiller kit contains a metal thermometer, which displays degrees Celsius and Fahrenheit, so you can more accurately grasp the temperature of the fermenter during use. Please Note: the cooling barrel has water inlets and water outlets, which enter through the lower inlet and discharge from the upper outlet to achieve efficient cooling and improve efficiency.
- 🍸 Multiple Uses — You can make all your favorite beverages in the alcohol distiller, such as whiskey, scotch, rum, tequila, brandy, vodka, etc. The spirit still can also be used to distill water, alcohol, and make essential oils. You can also install a one-way gas valve on the lid of the alcohol distiller according to your needs, which is also suitable for home brewing.
- 🍸 Quality Assurance — Free returns, free parts replacement! The liquor still kit included: fermentation barrel, condensing barrel, one-way valve, thermometer, silicone hose, sealing kit, user manual. Fermentation Pot: 12.2″ × 12.2″, Condensation Pot: 7.9″ × 5.1″. If you have any question during use, please contact the customer service at any time.
Seeutek Alcohol Still 5Gal 18L Stainless Steel Water Alcohol Distiller Kit Spirits Boiler Copper Tube Ethanol Still Build-in Thermometer for Home Brewing and DIY Whisky Wine Brandy Making
$237.73
Seeutek Professional Alcohol Still Distillation– Home whiskey distiller, suitable for beginners or professional, easy to use. The home distiller adopts an open cooling method. The copper cooling tube has good thermal conductivity and has a larger contact area with the coolant. This makes the distilling equipment have excellent cooling performance and increase the wine production speed. Multiple Uses–You can make all your favorite beverages in the pot still, such as whiskey, scotch, rum, tequila, brandy, vodka, etc. The home still can also be used to distill water, alcohol, and make essential oils. You can also install a one-way gas valve on the lid of the home distilling kit according to your needs, which is very suitable for home brewing
| Weight | 4.35 kg |
|---|---|
| Dimensions | 35.56 × 29.97 × 35.56 cm |
| Brand | Seeutek |
| Model Number | 5 Gal |
| Colour | Silver |
| Product dimensions | 35.56 x 29.97 x 35.56 cm; 4.35 Kilograms |
| Material | Copper Stainless Steel |
| Item Weight | 4.35 kg |
| ASIN | B011ZYE32U |
| Date First Available | 11 December 2015 |
| Manufacturer | Seeutek |
5 reviews for Seeutek Alcohol Still 5Gal 18L Stainless Steel Water Alcohol Distiller Kit Spirits Boiler Copper Tube Ethanol Still Build-in Thermometer for Home Brewing and DIY Whisky Wine Brandy Making
Related products
-
Water Filters for Breville Barista Express BES870 & Duo-Temp Pro BES810 Machine (6 Filters)
$13.49 Buy now -
Cuisinart Chef’s iA+ Non-Stick Fry Pan/Skillet, 30 cm Black 47183
$121.68 Buy now -
Sunbeam EM0440 GrindFresh Conical Burr Coffee Grinder, 25 Grind Settings, Direct to Handle Grinding, 250g Bean Hopper, for Espresso, Filter, Turkish Coffee and More, Grey/White
$60.00 Buy now
Waydavis –
Using for water Distilling – Using Induction? Read this
It will take at LEAST a 1800w Induction cooktop to get the water to boil. I tried a Nuwave gold 1500w. After over a hour at high(SEAR), it could NOT come up boiling even with its 8″ induction coil. The DUXTOP PRO had it at a rolling boil in one hour and ten minutes. Interestingly, the bottom of the pot will NOT hold a magnet, yet it works. Not sure how. I question the efficiency. Is there barely enough iron to qualify as compatible with Induction? Don’t know, and they do not mention it. The ad shows a pump in several images AND the video. YOU will not get a pump. THAT annoys me. If it isn’t included, DONT SHOW IT! The fact that the kit was under $100 is NOT the point. The fact that (I) now have to go find one Is worth a 1 star reduction for sure and I consider it underhanded at best on their part. I ran it a very short time without any cooling for the test and super hot steam was coming out of the end of the “worm”. The worm was VERY hot as expected.
Nobody –
Works great, a few flaws
It works well, but there’s a few flaws especially for those in the USA.1. The plastic hoses are far too short for most USA homes, since we don’t use portable burners, so we can’t place the still 6″ from the sink. Easily solved though by buying 2 x 10′ long 3/8in inside diameter hoses.2. The worm box is small, and sits directly on top of the still, so it gets hotter faster than it should.If you live in a desert climate like me (California, Utah, Nevada…) then you are goin to want to set up an eco-friendly configuration since your state will likely fine you otherwise for redirecting the entire contents of a small river to cool the worm box.Eco-friendly configuration:Ignore the instructions that tell you to hook the cold water input to your hose. Instead, what we are going to do is turn your double-sink into an enormous worm box for your worm box coolant. This works well because there is so much surface area in your sink:Plug both sides of the sink. Fill one side 3/4 full of cold water.Place the bottom tube with sink attachment for weight hanging over the empty side of the sink. We’re going to use this tube as a hot water drain instead of a cold water input.Place the top tube in either side of the sink, we don’t care since we’re just going to use this for overflow protection, so not much water will flow through it.Get a small pitcher and dunk it in the cold water side of the sink, then pour it into the worm box. You will need to do this continually to keep the worm box filled, so either use an underwater pump for this, or expect some exercise. I like the exercise.When the cold side of the sink gets low, then simply move the drain hose into the other side of the sink and then start scooping / pumping from the full side that is now cooled down thanks to the surface area of the sink.
PossumPie –
BEWARE…NOT stainless steel as advertised
Easy to assemble, good value for the money, BUT a magnet will not stick to any part of the still except the two handles. It is NOT stainless steel. Why does that matter? You CANNOT use an induction heat source to heat the pot. I wanted to put it beside my sink so that I could hook the condenser tubes to the water and drain it into the sink. I can’t b/c the stove is too far from the sink. Don’t get it if you plan to use an induction heat source.
Tory Schulte –
Rusty thermometer
The still functioned as intended but after the 2nd use I noticed the thermometer starting to rust, I cleaned it and tried to use again and instantly turned the screw for the thermometer into a big rust pile which leaked into my water making it taste extremely metallic, I replaced it.
Daniel Benoir –
Good quality kit, successful brew
Kit came with everything included as stated. Nothing to complain about, 3gal was plenty for personal consumable amount with friends.